Dive deep into MikroTik's RouterBoards and RouterOS. We keep you informed and up-to-date, always.



Every post is penned by our certified MikroTik engineers, ensuring relevance and accuracy in every word.



Your insights drive our content. Sharing knowledge, we elevate the MikroTik community in Canada together.

Get Rid of All Wire Clutter!

Workplace Mess Benefits No One!

It's an all-too-familiar scenario. You set up a server room or an office network with a handful of hardware. Everything's tidy in the beginning. The wires are bundled, the devices aligned, and you cannot find a single screw lying about.


Before you know it, though, after a few replacements, some troubleshooting, and a network upgrade, thing's go to hell! Devices pile on top of each other, nuts and bolts are all over place, and you're office life is forever taken hostage by a messy tangle of colorful wires! Sounds familiar?

Do it Early & Do it Right!

Like any habit, with discipline and the necessary tools, you can get rid of all wire clutters at your workplace. You're on your own regarding the former but in terms of tools, we have your back from the get-go!

The SR-10U Standard 19" Rack

Whether you're working with MikroTik's routers and switches or using devices from other manufacturers, this rack-mount accommodates all hardware that fit a standard 19" rack.


Thanks to its size, it can be on a desk or mounted under it, and its adjustable angles allow for the easiest access to devices. Also, it has enough room on the back for a multi-plug extension cord for power cables.


Made of lightweight aluminium to minimze the weight, the SR-10U comes with sufficient room, units, and spare screws formounting at least 10 devices.


You won't wanna miss Druvis checking out this nice rack!


A 1U dual or 10’’ rackmount kit, the RMK-2/10 helps you to install two of the smaller MikroTik form-factor devices
within traditional 19" racks, such as the SR-10U above!

You can either put together a pair and place it between two pieces of hardware for a clean look and a firm placing or permanently break off a part of the bracket to use them as rack ears and install a single 200 mm device.

The RMK-2/10 is compatible with CSS610-8G-2S+IN, CRS109-8G-1S-2HnD-IN, CRS112-8G-4S-IN, CRS310-1G-5S-4S+IN, and CRS112-8P-4S-IN, as well as other device with a length of 200mm!

Looking for Other MikroTik Accessories?

RB5009 K-79 Rackmount Kit

If you are a true MikroTik enthusiast, you've probably already started using one of the two RB5009s. If yes, you can get creative and use the tiny K-79 accessory kit to mount 4 to 40 RB5009UG+S+IN or RB5009UPr+S+IN routers in a single SR-10U!

Easily Said, More Easily Done!

Keeping your server room tidy is not a difficult task. All you have to do is to create a scalable network design, get the most suitable devices, and have the right equipment to put it all together. The good news is that we can help you every single step of the way! Call us today and make life a lot easier!

MikroTik News