Wireless Bridging Made Super Easy

Modest on the outside and pretty nifty on the inside, the Cube 60Pro ac comes with a 716-MHz, QuadCore ARM-32bit IPQ-4019 CPU, 256 MBs of RAM, and 64 MBs FLASH storage.

For management, this device uses one Gigabit Ethernet port and, as for wireless connections, it has a single 5 GHz 802.11a/n/ac chain. It also benefits from the 802.11ay standard that helps achieve higher distances, stability, speed, and convenience in comparison to previous 60 GHz devices.

The standard P2P connections made by this Cube - thanks to its 5 GHz antenna gain of 11.5 (dBi), 5 Ghz antenna beam width of 35°, and 60 GHz antenna beam width of 11 - easily reach 1 Km.

However, that's not all! With the addition of hannel 5* support, this hardware will enable you to reach even higher distances if necessary. In simulated tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km.

For a presentation of this hardware, sit back and let MikroTik's Kaspars fill you in on all the details:

It most certainly could!

For maximum client convenience and practicality, MikroTik has prepared the Wireless Wire Cube Pro: A kit of two Cube 60Pro ac devices that have been pre-configured and are fully plug-and-play.

Simply mount the hardware in places that provide them with a direct line of sight, point them toward each other, power them on, sit back, and enjoy the superfast connection!

Take a look at the picture below: It can give you a general idea on how the Wireless Wire Cube Pro can make life easier!

Thinking of point-to-multipoint connections? Already taken care of!

Complementing this new level of 60 GHz connectivity is the CubeSA 60Pro ac sector antenna with distance coverage of around 600 meters in point-to-multipoint mode.